LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1236 (Auto Cruise Control System) >> Auto Cruise Control System - ICC >> Laser Beam Aiming Adjustment >> Outline of Laser Beam Aiming Adjustment Procedure

Outline of Laser Beam Aiming Adjustment Procedure

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • The laser beam aiming adjustment cannot be performed without CONSULT-II.
  • The laser beam aiming adjustment must be performed every time the ICC sensor is removed, installed or has been moved as a result of a collision.
  1. Prepare the vehicle and the work area.
  2. Set up the ICC target board.

    Tool number: KV99110100 (J-45718) 

  3. Adjust the sensor following the procedure on CONSULT-II.
  4. Check system operation after the adjustment.
scientia non olet · About LEMON Manuals