RH Turn

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

When the turn signal switch is moved to the right position, the BCM interpreting it as turn signal is ON, outputs turn signal from BCM terminal 61.

The BCM supplies power

Through BCM terminal 61
To front turn/fog lamp RH terminal 2
Through front turn/fog lamp RH terminal 3
To grounds E9, E15 and E24, and
To rear turn signal lamp RH terminal 1
Through rear signal lamp terminal 3
To grounds B117 and B132.

BCM sends signal to combination meter through CAN communication lines, and turns on turn signal indicator lamp within combination meter.