Trailer Power Supply Operation
WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
The trailer power supply is controlled by the trailer tow relay 2.
When the ignition switch is in the ON or START position, power is supplied
- Through 10A fuse (No. 51, located in the IPDM E/R)
- Through IPDM E/R terminal 16
- To trailer tow relay 2 terminal 1.
When energized, the trailer tow relay 2 supplies power
- Through trailer tow relay 2 terminals 5 and 7
- To trailer connector terminal 5.