LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1228 (Automatic Air Conditioner) >> Refrigerant Lines >> Removal and Installation for Compressor >> Removal

Removal and Installation for Compressor: Removal

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Discharge the refrigerant. Refer to "HFC-134A (R-134A) SERVICE PROCEDURE ".
  2. Remove the front right wheel and tire assembly. Refer to "ROTATION ".
  3. Remove the engine under cover and the splash shield using power tool.
  4. Remove the engine air cleaner and air ducts. Refer to "AIR CLEANER AND AIR DUCT ".
  5. Remove the drive belt. Refer to "DRIVE BELTS ".
  6. Disconnect the compressor electrical connector.
  7. Disconnect the high-pressure flexible hose and low-pressure flexible hose from the compressor.
    CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
  8. Remove the compressor bolts and nut using power tools.
scientia non olet · About LEMON Manuals