Removal and Installation: Installation
WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- Install the glass from outside to insure that it is even with the top and bottom of the opening. Tighten rear side window front mounting nuts to the specified torque.
- Glass mounting nuts: 4.2 N.m (0.43 kg-m, 37 in-lb)
- Install rear side window motor mounting bolts. Tighten rear side window latch mounting bolts to the specified torque.
- Motor mounting bolts: 5.6 N.m (0.57 kg-m, 49 in-lb)
- Connect the rear side window motor harness.
- Install rear pillar upper and lower finisher. Refer to "BODY SIDE TRIM ".