LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1219 (Power Steering System) >> Power Steering Oil Pump >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain power steering fluid from reservoir tank.
  2. Remove engine room cover. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove air duct assembly. Refer to "REMOVAL AND INSTALLATION ".
  4. Remove power steering reservoir tank.
  5. Remove serpentine drive belt from auto tensioner and power steering pump. Refer to "REMOVAL AND INSTALLATION ".
  6. Disconnect pressure sensor electrical connector.
  7. Remove high pressure and low pressure piping from power steering oil pump. Refer to "HYDRAULIC LINE ".
  8. Remove mounting bolts, then remove power steering pump.
scientia non olet · About LEMON Manuals