Outer Socket and Inner Socket Rotating Torque

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Using Tool, check if reading is within the value specified below. If the value is outside the standard, replace outer sockets.

Tool number: ST3127S000 (J-25765-A)
Rotating torque: 0.3-2.9 N.m (0.03-0.29 kg-m, 3-25 in-lb)

Fig 1: Checking Socket Rotating Torque With Specified Tool
Courtesy of NISSAN MOTOR CO., U.S.A.