Engine System Inspection

INSPECTION PROCEDURE

1. SELF-DIAGNOSIS RESULT CHECK 

   Check self-diagnosis results.

   ENGINE SYSTEM INSPECTION - SELF-DIAGNOSIS RESULTS
   
   

   Self-diagnosis results
   ENGINE SIGNAL 1
   ENGINE SIGNAL 2
   ENGINE SIGNAL 3
   ENGINE SIGNAL 4
   ENGINE SIGNAL 6

   Is the above displayed in the self-diagnosis display items? 

   1. YES: GO TO 2.
   2. NO: Inspection End.
2. ENGINE SYSTEM INSPECTION 
   1. Perform ECM self-diagnosis and repair as necessary. Refer to "SELF-DIAG RESULTS MODE ".
   2. Perform ABS actuator and electric unit (control unit) self-diagnosis again.

   OK or NG 

   1. OK: Inspection End.
   2. NG: Repair or replace as necessary.