Removal and Installation of Brake Pad: Installation

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Push piston in so that pad is firmly attached and mount cylinder body to torque member.
NOTE: Using a disc brake piston tool (commercial service tool), makes it easier to push in the piston.

CAUTION: By pushing in piston, brake fluid returns to master cylinder reservoir tank. Watch the level of the surface of reservoir tank.
Install pads to cylinder body.
Install top mounting bolt and tighten to specification.
Check brake for drag.
Install tires to the vehicle. Refer to "ROTATION ".