Removal and Installation of Brake Caliper and Disc Rotor: Installation
WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Refill with new brake fluid. Refer to "RECOMMENDED FLUIDS AND LUBRICANTS ".
- Do not reuse drained brake fluid.
- Install disc rotor.
- Install cylinder body to the vehicle, and tighten mounting bolts to specification. Refer to
"COMPONENTS ".CAUTION: Before installing cylinder body to the vehicle, wipe off mounting surface of cylinder body.
- Install brake hose to cylinder body and tighten union bolt to specification as necessary. Refer to
"COMPONENTS ".CAUTION:
- Do not reuse copper washers.
- Securely attach brake hose to protrusion on cylinder body.
- Refill new brake fluid and bleed air as necessary. Refer to "BLEEDING BRAKE SYSTEM ".
- Install tires to the vehicle. Refer to "ROTATION ".