Removal and Installation of Brake Caliper Assembly and Disc Rotor: Removal

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

Remove tires from vehicle using power tool.
Drain brake fluid as necessary. Refer to "DRAIN AND REFILL ".
NOTE: Do not remove union bolt unless removing cylinder body from vehicle.
Remove torque member bolts.
NOTE: Position cylinder body aside using suitable wire, as necessary.

NOTE: When servicing cylinder body, remove sliding pin bolts and torque member from cylinder body.
Remove disc rotor.