LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1215 (Rear Suspension) >> Trouble Diagnosis >> CONSULT-II Function (AIR LEVELIZER) >> Active Test >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the CONSULT-II and CONSULT-II CONVERTER to the data link connector and start the engine.
    CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.
  2. Touch "START (NISSAN BASED VHCL)" on the display screen.
  3. Touch "AIR LEVELIZER".

    If "AIR LEVELIZER" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".

  4. Touch "ACTIVE TEST".
  5. The "SELECT TEST ITEM" screen is displayed.
  6. Touch necessary test item.
  7. With the "MAIN SIGNALS" display highlighted, touch "START".
  8. The active test screen will be displayed.
scientia non olet · About LEMON Manuals