LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1207 (Automatic Transmission) >> Shift Control System >> Control Device Removal and Installation >> Removal

Control Device Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove A/T finisher.
  2. Disconnect selector control cable.
  3. Disconnect A/T device harness connector.
  4. Remove control device assembly.
scientia non olet · About LEMON Manuals