With Consult-II
WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch ON and wait at least 1 second.
- Select "DATA MONITOR" mode with CONSULT-II.
- Start engine and let it idle for 1 second.
- Turn ignition switch OFF, wait at least 10 seconds and then turn ON.
- Repeat steps 3 and 4 for 4 times.
- If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "