Removal Of Liquid Gasket Sealing

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.

After removing the bolts and nuts, separate the mating surface and remove the old liquid gasket sealing using Tool.
1. Tool number: KV10111100 (J-37228)
CAUTION: Do not damage the mating surfaces.
Tap the seal cutter to insert it.
In areas where the Tool is difficult to use, lightly tap to slide it.

Fig 1: Removing Old Liquid Gasket Sealing Using Tool
Courtesy of NISSAN MOTOR CO., U.S.A.