LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1201 (Engine Lubrication System) >> Oil Cooler >> Removal and Installation >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check levels and add engine oil and engine coolant. Refer to "OIL LEVEL " and "ENGINE COOLANT ".
  2. Start the engine, and check for leaks of engine oil and engine coolant.
  3. Stop engine and wait for 10 minutes.
  4. Check engine oil level and engine coolant level again.
scientia non olet · About LEMON Manuals