LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1200 (Engine Mechanical) >> Ignition Coil >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine room cover using power tool. Refer to ENGINE ROOM COVER .
  2. Disconnect the harness connector from the ignition coil.
  3. Remove the ignition coil.
    CAUTION: Do not shock it.
scientia non olet · About LEMON Manuals