System Description

IVIS (Infinity Vehicle Immobilizer System-NATS) has the following immobilizer functions:

• Since only IVIS (NATS) ignition keys, whose IDs have been registered into the ECM and BCM, allow the engine to run, operation of a stolen vehicle without a IVIS (NATS) registered key is prevented by IVIS (NATS).

  IVIS (NATS) will immobilize the engine if someone tries to start it without the registered key of IVIS (NATS).

• All of the originally supplied ignition key IDs have been IVIS (NATS) registered.

  If requested by the vehicle owner, a maximum of five key IDs can be registered into the IVIS (NATS) components.

• The security indicator blinks when the ignition switch is in OFF or ACC position. IVIS (NATS) warns outsiders that the vehicle is equipped with the anti-theft system.
• When IVIS (NATS) detects trouble, the security indicator lamp lights up while ignition key is in the ON position.
• IVIS (NATS) trouble diagnoses, system initialization and additional registration of other IVIS (NATS) ignition key IDs must be carried out using CONSULT-II hardware and CONSULT-II IVIS (NATS) software. When IVIS (NATS) initialization has been completed, the ID of the inserted ignition key is automatically IVIS (NATS) registered. Then, if necessary, additional registration of other IVIS (NATS) ignition key IDs can be carried out.

  Regarding the procedures of IVIS (NATS) initialization and IVIS (NATS) ignition key ID registration, refer to CONSULT-II Operation Manual NATS-IVIS/NVIS.

• When servicing a malfunction of the IVIS (NATS) (indicated by lighting up of Security Indicator Lamp) or registering another IVIS (NATS) ignition key ID, it may be necessary to re-register original key identification. Therefore, be sure to receive ALL KEYS from vehicle owner.