Outside Temperature Display

Push the mode switch when the ignition switch is in the ON position. The outside temperature will be displayed in °F.

• Selecting the indication range
• Push the switch to change from °F to °C.
• The indicated temperature on the thermometer is not readily affected by engine heat. It changes only when one of the following conditions is present.

• The temperature detected by the ambient sensor is lower than the indicated temperature on the thermometer.
• The vehicle speed is greater than 20 km/h (13 MPH).

  (This is to prevent the indicated temperature from being affected by engine heat during low-speed driving.)

• The ignition switch has been turned to the OFF position for more than 2 hours. (The engine is cold.)