RH Turn
When the turn signal switch is moved to the right position, BCM (body control module) outputs turn signal from BCM (body control module) terminal 61, interpreting it as turn signal is ON.
The BCM supplies power
- From terminal 61
- To front turn/fog lamp RH terminal 2
- Through front turn/fog lamp RH terminal 3
- To grounds E9, E15 and E24, and
- To rear turn signal lamp RH terminal 1
- Through rear signal lamp terminal 3
- To grounds B117 and B132.
BCM (body control module) sends signal to combination meter through CAN communication lines, and turns on turn signal indicator lamp within combination meter.