LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> M45 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> DTC P1772: Low Coast Brake Solenoid Valve >> Component Inspection >> Low Coast Brake Solenoid Valve >> Resistance Check

Resistance Check

  1. Turn ignition switch OFF.
  2. Remove oil pan. Refer to ," CONTROL VALVE ASSEMBLY  "  .
  3. Disconnect control valve assembly harness connector.
  4. Check resistance between terminal and ground.
    Fig 1: Step 4 Specifications Chart
    G00749561Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Testing Procedures For Step 4
    G00749562Courtesy of NISSAN MOTOR CO., U.S.A.
  5. If NG, replace control valve assembly. Refer to ," CONTROL VALVE ASSEMBLY  "  .
scientia non olet · About LEMON Manuals