LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> Suspension >> Rear Suspension >> 2004.5 - Rear Suspension - Sedan >> Suspension Arm >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove tire with power tool.
  2. Remove drive shaft. Refer to "REAR DRIVE SHAFT ".
  3. Remove connecting rod mounting bracket from suspension arm with power tool.
  4. Remove fixing nuts and bolts between suspension arm and rear suspension member.
  5. Remove cotter pin of suspension arm ball joint, and loosen nut.
  6. Use a ball joint remover (suitable tool) to remove suspension arm from axle. Be careful not to damage ball joint boot.
    CAUTION: Tighten temporarily mounting nut to prevent damage to threads and to prevent ball joint remover (suitable tool) from coming off.
  7. Remove suspension arm and stopper rubber from vehicle.
scientia non olet · About LEMON Manuals