LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> Suspension >> Rear Suspension >> 2004 - Rear Suspension - Sedan >> Rear Suspension Assembly >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove tire with power tool.
  2. Remove brake caliper with power tool. Hang it in a place where it will not interfere with work. Refer to REAR DISC BRAKE .
    NOTE: Avoid depressing brake pedal while brake caliper is removed.
  3. Remove stabilizer bar. Refer to "STABILIZER BAR ".
  4. Remove rear exhaust tube. Refer to EXHAUST SYSTEM - SEDAN - 2004 .
  5. Remove rear propeller shaft. Refer to REAR PROPELLER SHAFT .
  6. Separate attachment bolts between parking brake cable and vehicle and rear suspension member. Refer to PARKING BRAKE SYSTEM - SEDAN - 2004 .
  7. Remove wheel sensor from rear final drive.
  8. Remove rear lower link and coil spring. Refer to "REAR LOWER LINK & COIL SPRING ".
  9. Remove fixing bolt in upper side of mounting seal bracket. Refer to "SHOCK ABSORBER ".
  10. Set jack under rear final drive.
  11. Remove member stay from vehicle.
  12. Remove mount stopper mounting nut.
  13. Gradually lowering jack, remove rear suspension assembly.
scientia non olet · About LEMON Manuals