LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> Suspension >> Rear Suspension >> 2004 - Rear Suspension - Sedan >> Radius Rod >> Removal and Installation >> Removal >> Notes

Removal and Installation: Removal: Notes

  1. Remove tire with power tool.
  2. Remove brake caliper with power tool. Hang it in a place where it will not interfere with work. Refer to BRAKE SYSTEM - SEDAN - 2004 .
    NOTE: Avoid depressing brake pedal while brake caliper is removed.
  3. Remove fixing bolt and nut in axle side of radius rod with power tool.
  4. Remove rear lower link and coil spring. Refer to "REAR LOWER LINK & COIL SPRING ".
  5. Remove fixing bolt in lower side of shock absorber with power tool.
  6. Remove fixing bolt and nut in axle side of front lower link with power tool.
  7. Remove fixing bolt in rear suspension member side of radius rod with power tool, then remove radius rod from vehicle.
scientia non olet · About LEMON Manuals