LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> Electrical >> Gauges >> 2004 - Gauges & Instrument Panels - Coupe/Sedan >> Instrument Panel Assembly >> Removal and Installation >> Removal >> (I) Console Finisher (A/T Models)

(I) Console Finisher (A/T Models)

  1. Put selector lever in drive position.
  2. Remove metal clips from rear of console finisher, then remove metal clips at front. Pull console finisher upward to disengage from console.
    CAUTION: Guide pin inserted into A/T device guide can be easily broken. Be careful when removing it.
  3. Disconnect harness connectors, and remove console finisher.
  4. After removing, remove each parts from console finisher. Refer to "CENTER CONSOLE (A/T MODELS)  ".
    Fig 1: Center Console (A/T Models)
    G00733749Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals