Removal and Installation: Removal
- Remove front grille. Refer to "FRONT GRILLE ".
- Remove front undercover and fender protector. Refer to "FENDER PROTECTOR ".
- Remove mounting clip on top of front bumper and screws on side of front bumper. Refer to "FRONT BUMPER ".
- Pull side of the front bumper toward the vehicle front and disengage it from clips on the body.
- Remove headlamp mounting bolts.
- Pull headlamp toward vehicle front, disconnect connector, and remove headlamp.CAUTION: When removing headlamps, put a shop cloth or something similar between headlamps and bumper to protect bumper.