Terminals and Reference Values for IPDM E/R
TERMINALS AND REFERENCE VALUES FOR IPDM E/R
| Terminal No. | Wire color | Signal name | Measuring condition | Reference value | ||
|---|---|---|---|---|---|---|
| Ignition switch | Operation or condition | |||||
| 20 | R | Headlamp low (RH) | ON | Lighting switch 2ND position | OFF | Approx. 0V |
| ON | Battery voltage | |||||
| 27 | Headlamp high (RH) | ON | Lighting switch HIGH or PASS position | OFF | Approx. 0V | |
| ON | Battery voltage | |||||
| 28 | R/Y | Headlamp high (LH) | ON | Lighting switch HIGH or PASS position | OFF | Approx. 0V |
| ON | Battery voltage | |||||
| 30 | R/B | Headlamp low (LH) | ON | Lighting switch 2ND position | OFF | Approx. 0V |
| ON | Battery voltage | |||||
| 38 | B | Ground | ON | - | Approx. 0V | |
| 48 | L | CAN- H | - | - | - | |
| 49 | R | CAN- L | - | - | - | |
| 60 | B/W | Ground | ON | - | Approx. 0V | |