Operation Procedure
- Touch "ACTIVE TEST" on "SELECT DIAG MODE" screen.
- Touch item to be tested, and check operation.
- Touch "START".
- Touch "STOP" while testing to stop the operation.TEST ITEM DESCRIPTION (ACTIVE TEST)
Test item CONSULT-II screen display Description Headlamp relay (HI, LO) output LAMPS Allows headlamp relay (HI, LO) to operate by switching operation (OFF, HI ON, LO ON) at your option. Front fog lamp relay output Allows fog lamp relay to operate by switching operation ON-OFF at your option Tail lamp relay output TAIL LAMP Allows tail lamp relay to operate by switching operation ON-OFF at your option