Front Turn Signal Lamp
- Turn lighting switch OFF.
- Remove fender protector (front). Refer to "FENDER PROTECTOR ".
- Turn bulb socket counterclockwise and unlock it.
- Remove bulb from its socket.
Headlamp (upper) low beam (Xenon): 12V - 35W (D2R)
Headlamp (upper) low beam (Halogen): 12V - 55W (H1)
Headlamp (lower) high beam/Fog lamp: 12V - 60/55W (HB2)
Parking lamps (Clearance lamps): 12V - 5W
Front turn signal lamp: 12V - 21W
CAUTION:
After installing bulb, be sure to install plastic cap and bulb socket securely to insure watertightness.