CONSULT-II Functions (IPDM E/R): Notes
CONSULT-II can display each diagnostic item using the following diagnostic test modes: self-diagnostic results, data monitor and active test through data reception and command transmission via the IPDM E/R CAN communication line.
DIAGNOSIS DESCRIPTION
| Inspection Item, Diagnosis Mode | Description |
|---|---|
| SELF-DIAGNOSTIC RESULTS | The IPDM E/R performs self-diagnosis of CAN communication. |
| DATA MONITOR | The input/output data of the IPDM E/R is displayed in real time. |
| ACTIVE TEST | The IPDM E/R sends a drive signal to electronic components to check their operation. |