Power Supply And Ground Circuit

Power is supplied at all times

• Through 10A fuse [No. 19, located in the fuse block (J/B)]
• To combination meter terminal 43.

With the ignition switch in the ON or START position, power is supplied

• Through 10A fuse [No. 14, located in the fuse block (J/B)]
• To combination meter terminals 41 and 42.

With the ignition switch in the ACC or ON position, power is supplied

• Through 10A fuse [No. 6, located in the fuse block (J/B)]
• To combination meter terminal 40.

Ground is supplied

• To combination meter terminals 45 and 47
• Through body grounds M30 and M66.