Turn Signal Operation: Notes

When the ignition switch is in the ON or START position, power is supplied

• to BCM (body control module) terminal 38
• through 10A fuse [No. 1, located in the fuse block (J/B)]
• to combination meter terminals 41 and 42
• through 10A fuse [No. 14, located in the fuse block (J/B)].

Ground is supplied

• to BCM (body control module) terminal 52
• through grounds M30 and M66,
• to combination meter terminals 45 and 46
• through grounds M30 and M66.