Intermittent Operation
- The rear wiper motor operates the wiper arms at low speed approximately every 7 seconds.
- When wiper switch is in rear wiper INT position, BCM detects rear wiper INT signal by BCM wiper switch reading function (Refer to COMBINATION SWITCH READING FUNCTION
) BCM operates rear wiper motor, power supplied;
- Through BCM Terminal 70
- To Rear Wiper Motor Terminal 4.
- Ground is supplied
- To Rear Wiper Motor Terminal 2
- Through Body Grounds B15 And B45.
- With power and ground supplied, rear wiper operates at intermittent.