Wipers Do Not Wipe When Front Washer Operates

Select "BCM" on CONSULT-II. With "WIPER" on "DATA MONITOR", make sure "FR WASHER SW" turns ON-OFF according to operation of front washer switch.

1. When front wiper switch washer position: FR WASHER SW ON 

OK or NG 

1. OK: Replace BCM. Refer to REMOVAL AND INSTALLATION OF BCM .
2. NG: Replace wiper switch.

Fig 1: Displaying Wiper Information On Data Monitor

Courtesy of NISSAN MOTOR CO., U.S.A.