Washer Operation
- When wiper switch is in front wiper washer position with ignition switch on, BCM detects front wiper switch is on the washer position by BCM wiper switch reading function (Refer to COMBINATION SWITCH READING FUNCTION
), combination switch (wiper switch) ground is supplied
- To Front Washer Motor Terminal 2
- Through Combination Switch (Wiper Switch) Terminal 11
- To Combination Switch (Wiper Switch) Terminal 12
- Through Body Grounds M35, M45 And M85
- With ground supplied, front washer motor is operated:
- When BCM Detects That Front Washer Motor Has Operated For 0.4 Seconds Or Linger, BCM Operates Front Wiper Motor For Low Speed.
- When BCM Detects Washer Switch Is OFF, Low Speed Operation Cycles Approximately 3 Times And Stops.