Wiper Dial Position Setting
Courtesy of NISSAN MOTOR CO., U.S.A.
- Example: For wiper dial position 1 ...
- Using combination switch reading function, BCM detects ON/OFF status of intermittent operation dial positions 1, 2, and 3.
- When combination switch status is as listed below, BCM determines that it is wiper dial position 1.
- Intermittent operation dial position 1: ON (Combination switch output 3 and input 1 are performing.)
- Intermittent operation dial position 2: ON (Combination switch output 5 and input 1 are performing.)
- Intermittent operation dial position 3: ON (Combination switch output 4 and output 2 are performing.)
- BCM determines front wiper intermittent operation delay interval from wiper dial position 1 and vehicle speed, and sends wiper request signal (INT) to IPDM E/R.