LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> FX35 RWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiper, Washer & Horn >> Front Wiper And Washer System >> Removal And Installation Of Washer Tank >> Installation

Removal And Installation Of Washer Tank: Installation

Note the following, and install in the reverse order of removal.

NOTE: After installation, add water up to the upper level of the washer tank inlet, and check for water leaks.
  1. Washer tank mounting screw : 5.8 N.m (0.59 kg-m, 51 in-lb) 
  2. Washer tank mounting nut : 5.8 N.m (0.59 kg-m, 51 in-lb) 
  3. Washer tank inlet mounting bolt : 6.9 N.m (0.70 kg-m, 61 in-lb) 
scientia non olet · About LEMON Manuals