LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> QX4 4WD >> Labor Times >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All2.2B
Front,Both Sides1.0B
Rear,Both Sides1.4B
Combination Procedure: AXLE SEAL: Replace:
Rear,Both0.8B
Rear,One Side0.6B
Combination Procedure: BRAKE HOSE: Replace:
Includes: Bleed Brake System.
Each Additional0.2B
One0.3B
Combination Procedure: CALIPER: Overhaul:
Includes: Bleed Brake System.
One,Double Piston0.7B
Combination Procedure: CALIPER: Replace:
Includes: Bleed Brake System.
One0.3B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: DISC ROTOR: Remove & Install or Remove & Replace:
4WDIncludes: Repack Wheel Bearings.1.1B
Combination Procedure: DISC ROTOR: Remove and Install for Refinishing:
4WD, EachIncludes: Repack Wheel Bearings.1.0B
Combination Procedure: WHEEL BEARING: Repack:
4WD, Front,Both Sides2.0B
Combination Procedure: WHEEL BEARING: Replace:
4WD, Front,One SideIncludes: Repack Wheel Bearings.1.1B
Combination Procedure: WHEEL CYLINDER: Overhaul:
Includes: Bleed Brake System.
Off Vehicle,One0.5B
On Vehicle,One0.3B
Combination Procedure: WHEEL CYLINDER: Replace:
Includes: Bleed Brake System.
One0.3B