LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> Q45 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> DTC P1772: Low Coast Brake Solenoid Valve >> Component Inspection >> Low Coast Brake Solenoid Valve >> Resistance check

Resistance check

  1. Turn ignition switch "OFF".
  2. Remove oil pan. Refer to "CONTROL VALVE ASSEMBLY ".
  3. Disconnect control valve assembly harness connector.
  4. Check resistance between terminal and ground.
    Fig 1: Identifying Solenoid Valve Circuit And Terminal Table
    G02037948Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Checking Resistance Between Terminal And Ground
    G02037949Courtesy of NISSAN MOTOR CO., U.S.A.
  5. If NG, replace control valve assembly. Refer to "CONTROL VALVE ASSEMBLY ".
scientia non olet · About LEMON Manuals