LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> Q45 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> DTC P1767: High And Low Reverse Clutch Solenoid Valve >> Component Inspection >> High And Low Reverse Clutch Solenoid Valve >> Resistance check

Resistance check

  1. Turn ignition switch "OFF".
  2. Remove oil pan. Refer to "CONTROL VALVE ASSEMBLY ".
  3. Disconnect control valve assembly harness connector.
  4. Check resistance between terminal and ground.
    Fig 1: Identifying A/T Unit Harness Connector And Terminal Table
    G02037926Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Checking A/T Unit Harness Connector And Control Valve Harness Connector (1 Of 2)
    G02037927Courtesy of NISSAN MOTOR CO., U.S.A.
  5. If NG, replace control valve assembly. Refer to "CONTROL VALVE ASSEMBLY ".
scientia non olet · About LEMON Manuals