Inspection 14 When "STEERING ANGLE SENSOR HAS NOT BEEN CORRECTED" Appears on Self-Diagnosis Results Display

Inspection Procedure

1. CHECKING SELF-DIAGNOSIS RESULTS (1) 

   Check self-diagnosis results.

   Fig 1: Self-Diagnosis Results

   Courtesy of NISSAN MOTOR CO., U.S.A.

   Does anything besides "STEERING ANGLE SENSOR HAS NOT BEEN CORRECTED" appear on self-diagnosis results display? 

   1. YES >> Inspect and repair indicated items. Then perform self-diagnosis again.
   2. NO >> Perform adjustment of steering angle sensor neutral position. Then GO TO 2.
2. CHECKING SELF-DIAGNOSIS RESULTS (2) 
   1. Turn ignition switch OFF, and ON to erase self-diagnosis results, and perform VDC/TCS/ABS control unit self-diagnosis again.

   Does anything appear on self-diagnosis results display? 

   1. YES >> Replace steering angle sensor. Then perform adjustment of neutral position and perform self-diagnosis again.
   2. NO >> Inspection is completed.