LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> Q45 >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Parking License & Tail Lamps >> Removal And Installation >> License Plate Lamp >> Removal

License Plate Lamp: Removal

  1. Remove the license plate finisher. Refer to TRUNK ROOM TRIM & TRUNK LID FINISHER in EXTERIOR & INTERIOR article.
  2. Disconnect the license plate lamp connector.
  3. Remove the license plate lamp mounting screw and remove the license plate lamp from the vehicle.
    Fig 1: Removing License Plate Lamp From Vehicle
    G03389243Courtesy of NISSAN MOTOR CO., U.S.A.