License Plate Lamp

Open the trunk and remove the trunk lid finisher. Refer to TRUNK ROOM TRIM & TRUNK LID FINISHER in EXTERIOR & INTERIOR article.
Disconnect the license plate lamp connector.
Turn the bulb socket counterclockwise and unlock it.
Remove the bulb from its socket.
License plate lamp : 12V 5W

License plate lamp mounting screw:

: 1.86 - 2.94 N.m (0.19 - 0.29kg-m, 17 - 26 in.lb)

Fig 1: Removing Bulb From Bulb Socket (License Plate Lamp)
Courtesy of NISSAN MOTOR CO., U.S.A.