LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> M45 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> DTC P1772: Low Coast Brake Solenoid Valve >> Component Inspection >> Low Coast Brake Solenoid Valve >> Resistance check

Resistance check

  1. Turn ignition switch "OFF".
  2. Remove oil pan. Refer to "Control Valve Assembly ".
  3. Disconnect control valve assembly harness connector.
  4. Check resistance between terminal and ground.
    Fig 1: DTC P1772 Connector Terminal Resistance Table
    G02021533Courtesy of NISSAN MOTOR CO., U.S.A.
  5. If NG, replace control valve assembly. Refer to "Control Valve Assembly "
    Fig 2: Checking Low Coast Brake Solenoid Valve Resistance
    G02021534Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals