LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2003 >> M45 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> DTC P1767: High And Low Reverse Clutch Solenoid Valve >> Component Inspection >> High And Low Reverse Clutch Solenoid Valve >> Resistance check

Resistance check

  1. Turn ignition switch "OFF".
  2. Remove oil pan. Refer to "Control Valve Assembly ".
  3. Disconnect control valve assembly harness connector.
  4. Check resistance between terminal and ground.
    Fig 1: DTC P1767 Terminal Resistance Value Table
    G02021511Courtesy of NISSAN MOTOR CO., U.S.A.
  5. If NG, replace control valve assembly. Refer to "Control Valve Assembly ".
    Fig 2: DTC P1767 Checking High And Low Reverse Clutch Solenoid Valve Resistance
    G02021512Courtesy of NISSAN MOTOR CO., U.S.A.