Power Supply And Ground Circuit

Power is supplied at all times

• through 7.5A fuse [No. 24, located in the fuse block (J/B)].
• to combination meter terminal 62.

With the ignition switch in the ON or START position, power is supplied

• through 10A fuse [No. 8, located in the fuse block (J/B)].
• to combination meter terminal 66.

With ignition switch in the ACC or ON position, power is supplied

• through 10A fuse [No. 9, located in the fuse block (J/B)].
• to combination meter terminal 31.

Ground is supplied

• to combination meter terminal 59.
• through body grounds M4, M66 and M147.