Disabling & Activating Air Bag System
WARNING:
Accidental air bag deployment is possible. Personal injury may result. Air bag system voltage is maintained for at least 3 minutes after system is disabled. Wait at least 3 minutes after disabling air bag system before servicing. Servicing system before 3-minute period may cause accidental air bag deployment and possible personal injury.
- To disable air bag system, turn ignition switch to OFF position. Disconnect negative battery cable. Wait at least 3 minutes before working on or near air bag system components.
- To activate air bag system, ensure ignition switch is in OFF position. Connect negative battery cable. Check AIR BAG and seat belt warning lights for proper operation. See SYSTEM OPERATION CHECK .