LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2002 >> Q45 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel Service >> Instrument Panel Assembly >> Removal and Installation >> A/T Finisher

A/T Finisher

  1. Open console lid and cup holder lid. Hold rear part of A/T finisher, lift it up, and disconnect metal clips at its rear end.
  2. Hold side of A/T finisher, and disconnect metal clips in front. Pull it backward, remove it, and disconnect connectors.
    Fig 1: Removing A/T Finisher
    G02018488Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals