Power Supply & Ground Circuit

Power is supplied at all times through 10A fuse No. 6, located in the fuse block (J/B) No. 1 to combination meter terminal 57.

With the ignition switch in the ON or START position, power is supplied through 10A fuse No. 9, located in the fuse block (J/B) No. 1 to combination meter terminal 59.

With the ignition switch in the ACC or ON position, power is supplied through 10A fuse No. 21, located in the fuse block (J/B) No. 1 to combination meter terminal 1.

Ground is supplied to combination meter terminal 60, 61 and 62 through body grounds M24 and M114.