Power Supply & Ground Circuit

Power is supplied at all times:

• Through 10-amp fuse No. 12, located in the fuse block (J/B).
• to combination meter terminal No. 62.

With the ignition switch in the ACC or ON position, power is supplied:

• Through 10-amp fuse No. 1, located in the fuse block (J/B).
• To combination meter terminal No. 31.

With the ignition switch in the ON or START position, power is supplied:

• Through 10-amp fuse No. 30, located in the fuse block (J/B).
• To combination meter terminal No. 66.

Ground is supplied:

• To combination meter terminal No. 59.
• Through body grounds M9, M25 and M87. For body ground locations, see WIRING DIAGRAMS  .